1 week Ago
The Shure MVX2U is a compact device that plugs into any XLR micrphone and turns It into a USB ...
More version with live and zero-latency monitoring. Recently I was thinking about using one of my favorite XLR microphones for some recording directly to a laptop on location. Professional microphones usually include an XLR connector that needs to be plugged into a separate USB audio interface, but it’s just one more bulky bit of kit to carry around.
So, what’s the solution? One answer could be to use a USB microphone with a built-in interface, although that would mean buying another microphone that you might only use on odd occasions. However, if you already own or have a favorite XLR microphone that you use most of the time and would like to take it on the road, there is a compact solution. The Shure MVX2U is a small gadget that plugs into the XLR connector of any microphone and turns it into a USB model.
In essence, the MVX2U is a compact USB audio interface that turns any condenser or dynamic microphone into a USB-compatible microphone that’s easier to transport and plug into a laptop. At the end of the Shure MVX2U is a headphone jack for live monitoring and playback checks. Designed to be ready to record or stream audio straight out of the box when used with any XLR microphone, this compact device is aimed at podcasters, content creators and even musicians who want to use a high-end XLR mic.
The Shure MVX2U will work with most Windows/Mac computers and is compatible with the Shure MOTIV Mix app and works with any microphone. Shure’s MOTIV software has an intelligent DSP with an auto-level gain mode that can automatically adjust a microphone’s gain to ensure a consistent sound output. The ShurePlus MOTIV desktop app provides extras like a customizable sound signature with both auto-level mode and manual settings, it can be used to update the firmware of the MVX2U.
The Shure MVX2U has a three-pin female XLR connector that plugs directly into any condenser or ...
More dynamic XLR microphone. The configurable DSP has a manual mode that provides adjustable gain levels, a limiter, a compressor and EQ settings. All the settings can be saved as presets.
The MVX2U is also able to supply 48V of phantom power which is essential for driving condenser mics. With up to +60dB of gain, the MVX2U has enough power to amplify signals from traditionally hard-to-drive microphones such as Shure’s iconic SM7B. To provide zero-latency monitoring, the MVX2U includes a built-in 3.
5mm headphone jack for live monitoring and checking playback. The device is made to be robust enough to survive life on the road. The MVX2U is compatible with both macOS and Windows computers and comes with a USB-C to USB-C cable in the box for plugging it in directly to the host computer.
The Shure MVX2U audio interface is available now and is priced at $129 / £129 / €129. Frequency response: 20Hz – 20,000Hz. Input impedance (@ 1 kHz): 5.
8kΩ. Maximum input level: 7dBV. Digital noise floor (20 Hz to 20 kHz, A-Weighted): -105dBFS.
Minimum mic gain setting: 0dB. Maximum mic gain setting: 60dB. Adjustable gain range (0.
5 dB/step): 0dB – 60dB. Headphone output: 3.5 mm (1/8 inch) 20mW @ 32Ω.
Weight: 100g (3.5 oz). MFi certified: No.
Power requirements: Powered through a USB connector. Phantom power supply: 48V, 7mA. Max.
current draw through USB: 160mA..
