7 Parts That Often Need Replacing in Washing Machines

Share Share Share Share Email Washing machines are among the most important home appliances we use. Because we use them so often, some wear and tear is inevitable. Like anything that moves and uses water, some parts can break down over time.

Knowing which parts often need fixing can help you keep your machine running longer and wash clothes well. So, let’s look at seven common parts that sometimes need replacement in washing machines. The Thing That Moves the Clothes Inside your washer, something has to move the clothes around in the water to get them clean.



In top-loading machines (the ones you open from the top), a tall piece in the middle with fins called an agitator usually does this. It shakes or spins the clothes. In front-loading machines (the ones you open from the front), the big drum turns and lifts the clothes.

After a while, rubbing and pressure can break or wear down the plastic bits of the mixer. Also, water getting in and general wear can make the drum bearings in front loaders noisy or stuck. Fixing these parts is important for getting your clothes clean.

The Water Coming In The washing machine needs water to wash your clothes. A special part called the water inlet valve controls when and how much hot and cold water comes into the machine. Sometimes, tiny bits of stuff in the water can build up inside this valve.

This can make it slow to open or close, or even make it leak. If this valve doesn’t work right, your machine might not fill up enough, take too long, or keep filling even when it’s not supposed to. Replacing this valve is usually a simple fix to get the water flowing correctly again.

The Water Going Out After washing your clothes, the drain pump needs to remove the dirty water. This little motor pushes the water out. But sometimes, small things like fuzz, coins, or hair can get stuck in the pump.

Also, the motor itself can stop working after a while. If the drain pump doesn’t work, the water won’t go out, and your clothes will stay wet. You might need to look for Electrolux washing machine parts , specifically a new drain pump, to fix or replace the old one so the machine can get rid of the used water efficiently.

The Belt That Makes Things Spin In many top-loading washing machines, a rubber band called a drive belt connects the motor (the thing that makes power) to the agitator or drum. This belt helps the motor make those parts spin. But over time, constant tension and flexing can stretch out, crack, or even break this belt.

If the belt is broken, the agitator or drum won’t spin, and won’t wash your clothes. Putting in a new drive belt is a common repair that gets the spinning action working again. The Rubber Around the Door Front-loading washing machines have a rubber piece around the door opening.

This is called the door seal or bellows. It keeps water from getting out while the machine works. But this rubber is always wet, so mold can grow on it, and it can tear over time.

If the seal is damaged, water can leak out onto your floor. Replacing this rubber part is important to keep the water inside the machine where it belongs. The Parts That Stop Shaking Washing machines shake a lot, especially when they’re spinning the water out of your clothes.

Parts called the suspension system, which are like springs and shock absorbers, help keep the machine steady. But these parts can get weak or break over time, making the machine shake and make a lot of noise. Replacing these worn-out parts will make your washing machine quieter and more stable.

Also, visit: open company in Hong Kong The Thing That Heats the Water (Sometimes) Some washing machines can heat the water for certain washes. They have a part called a heating element, like the one in a kettle. Mineral buildup or electrical problems can make this part stop working.

If it breaks, the machine won’t be able to heat the water, which can make it harder to get your clothes clean, especially stains. Replacing this heating element will let your machine heat the water again. To sum it up, washing machines are real workhorses in our homes, cleaning clothes tirelessly.

Because they work so hard, certain parts will naturally wear out over time. Being aware of these common trouble spots, such as the spinning parts (agitator or drum), water controls, the pump that empties water, belts, the door rubber, shock absorbers, or the heater, helps you notice problems early on. If you see your washer acting strangely, don’t ignore it! Addressing these smaller issues by fixing or replacing the worn parts can prevent bigger, more expensive breakdowns later.

If you’re having trouble, look online for guides or call a local appliance repair person to keep your washing machine going strong for years to come. Related Items: Replacing , Washing Machines Share Share Share Share Email Recommended for you How Do Modern Washing Machines Work Front Load Vs Top Load Washing Machines: Which Is Better? Comments.